Batch Transfer to Another Tank

  1. Click Production → Tanks to go to the tank storage page.
  2. Find your tank containing the batch you wish to transfer. Click Transfer.
  3. Enter the transfer date.
  4. Enter the volume reading from the source tank after the transfer has been completed. This cannot exceed the source tank's capacity. Brew Ninja will display how much volume this transfer is removing.
  5. Select the tank you are transferring your batch to. The destination tank does not have to be empty; see this article for more information on blending.
  6. Enter the volume reading from the target tank after the transfer has been completed. This cannot exceed the target tank's capacity. Brew Ninja will calculate how much you are adding to the target tank and what percentage of your batch's volume is being lost to shrinkage based on the numbers you are providing.Note: if the warehouses of the source tank and the destination tank are different, you will receive a warning.
  7. Record materials consumed in transfer. If your transfer did not consume any materials, you may skip this section.
    1. Click Add to create a blank material record.
    2. Select the material that was consumed.
    3. Enter the quantity that was consumed. Brew Ninja will tell you what units this material's quantity is measured in.
    4. Click Save.
  8. Enter any additional notes on the transfer.
  9. Click Transfer.
  10. Your transfer is now complete.